Supervise Workplace Safety And Health In Process Plant (SWSHPP, Formerly MOM OPISC)
Course ID: TGS-2023040244
Course Overview
The purpose of this SWSHPP competency unit is to enable learners to Supervise Workplace Safety and Health in a Process Plant.
On completion of this unit, learners will have the knowledge and application skills to carry out hazard identification and risk assessment, comply with the safety and health management system, co-ordinate a permit-to-work system, and carry out safety inspections and investigations.
Learning Units
• Identify and comply with legislation and regulations relevant to oil/petrochemical industry when carrying out the duties and responsibilities of a supervisor
• Perform the roles and responsibilities of the supervisors to ensure workplace safety and health
• Conduct job safety analysis for a job or task
• Identify safety and health hazards associated with the job or task
• Evaluate the level of risks involved in identified hazards
• Develop ways to eliminate/mitigate hazards identified in accordance with risk management regulations
• Co-ordinate measures to control risks according to the organisation’s procedures
• Complete a risk assessment form
• Communicate risks to stakeholders according to the organisation’s procedures
You will gain competency in
- Identify and comply with legislation and regulations relevant to the oil/petrochemical industry when carrying out the duties and responsibilities of a supervisor:
- Importance: Compliance ensures that all operations are in line with established standards, thus reducing legal liabilities and potential fines. It helps in maintaining the license to operate and avoids disruptions caused by non-compliance.
- Perform the roles and responsibilities of the supervisors to ensure workplace safety and health:
- Importance: Supervisors are the frontline leaders who can directly influence worker behavior and safety culture. Their active participation and vigilance are crucial in preventing accidents, injuries, and fatalities.
- Conduct job safety analysis for a job or task:
- Importance: Job Safety Analysis (JSA) identifies potential hazards before they cause harm. It’s a proactive approach that ensures that workers understand the risks associated with specific tasks and take necessary precautions.
- Identify safety and health hazards associated with the job or task:
- Importance: Recognizing potential hazards is the first step in preventing accidents. By being aware of possible dangers, proactive measures can be taken to safeguard employees and assets.
- Evaluate the level of risks involved in identified hazards:
- Importance: Not all hazards are equally risky. Evaluating the risk level helps prioritize safety interventions and allocate resources where they’re most needed.
- Develop ways to eliminate/mitigate hazards identified in accordance with risk management regulations:
- Importance: Eliminating or mitigating risks ensures the safety of workers and reduces potential operational downtimes. This also aligns with regulatory requirements, showing a proactive approach to safety.
- Co-ordinate measures to control risks according to the organization’s procedures:
- Importance: Coordination ensures that risk control measures are effectively implemented across all sectors of the organization. This leads to consistency in safety practices and reduces chances of oversights or lapses.
- Complete a risk assessment form:
- Importance: Documentation provides a record of safety assessments, actions taken, and serves as evidence of due diligence. It can also be useful for future reference, training, and continual improvement.
- Communicate risks to stakeholders according to the organization’s procedures:
- Importance: Proper communication ensures that everyone involved, from workers to upper management, is informed about potential risks. This fosters a culture of safety where everyone is aligned and proactive about potential dangers.
Who Is This Course For?
Prerequisite
- Workplace literacy and numeracy Level 5 under Employability Skills System (ESS) Workplace Literacy and Numeracy Level 5 or equivalent.
- ‘O’ level completed for Singaporeans
- Form 3 completed for Malaysians
- Secondary School Leaving Certificate (SSLC) for Indians
- Secondary School Certificate for Bangladeshi
Learn At AAT Training Hub!
Industry Experience Spanning 20 Years
Experienced Trainers with Industrial Exposure
Immersive Learning Through Hands-On Approach
Helpful and encouraging Environment
Certification
Upon fulfilling the course requirements with a minimum attendance rate of 100% and demonstrating proficiency in the assessments, candidates will be awarded a
- Certificate of Completion from AAT Training Hub
- Nationally recognised WSQ Statement of Attainment
FAQs:
The course would be appropriate for individuals who are contractors, managers and supervisors from the process industry.
Upon successful completion of the course, you will receive
- Certificate of Completion from AAT Training Hub
- WSQ Statement of Attainment
You can:
- Register online: www.aattraininghub.com/crm
- Call us at 62924804
- Email us at admin@aattraininghub.com
We will get back to you as soon as possible.
Choose date for
SUPERVISE WSH IN PROCESS PLANT
Course Fees: $330.00
Course Fees incl GST: $359.70
| Start Date | End Date | Time | Location | Language | Register |
|---|---|---|---|---|---|
| 02-Dec Monday | 19-Dec Thursday | 09:00 to 18:00 | Centrium Square | English | Book Now - Batch:22789 |
| 08-Dec Sunday | 29-Dec Sunday | 09:00 to 18:00 | Centrium Square | English | Book Now - Batch:22870 |
| 21-Dec Saturday | 28-Dec Saturday | 09:00 to 18:00 | Centrium Square | English | Book Now - Batch:22833 |
| 09-Dec Monday | 12-Dec Thursday | 09:00 to 18:00 | Farrer Park | English | Book Now - Batch:23045 |
About this course:
Claimable With SkillsFuture Credits And PSEA
English
50,000+
32 hours
$330(Full fee), $165(Subsidy for Citizen and PR)
Centrium Square,
Klang Lane,
Other courses
Basic Traffic Control Course
Under LTA Code Of Practice Requirements, Only Trained & Competent Personnel Are Allowed To Be Involved In Roadwork Related / Traffic Control.
HTDP Transport Driver Course In Singapore
Under the current legislation of the Fire Safety Act (FSA) and the Environmental Pollution Control Act..
Bizsafe Course Develop A Risk Management Implementation Plan (Bizsafe Level 2)
his Bizsafe course in Develop a Risk Management Implementation Plan (Level 2) aims to
Banksman For Vehicle Safety Course
To provide participants with a thorough understanding of the role and responsibilities of a Vehicle Banksman
